Best Compost Maker

Best compost maker turning machine is a fermentation type organic fertilizer equipment. It is a special equipment used to process solid organic waste and realize aerobic high temperature composting. It is the main machine of the composting fermentation field. By using this equipment, continuous production can be realized, so that the compost raw materials can be fully oxygenated, fermented evenly, and part of the water can be discharged, so as to achieve the purpose of harmlessness and resource utilization.

1. The machine consists of a walking fermentation tank, a walking track, a power supply device, a turning part and a trough transfer device

2. The organic fertilizer trough turning machine is a special equipment for treating solid organic waste and realizing aerobic high-temperature composting. It is the main machine of the composting fermentation field.

3. By using this equipment, continuous production can be achieved, so that the compost raw materials are fully oxygenated, fermented evenly, and part of the water is discharged to achieve the purpose of harmlessness and resource utilization.

4. The equipment adopts a track operation mode, which makes the production process have good reliability and minimizes energy consumption.

5. It has the advantages of high output, low energy consumption, small area of ​​turning site, low investment in equipment, low moisture reduction in material turning and fermentation process, stable equipment operation, low failure rate and fast fertilizer production.

1. Check whether the oil system and lubrication system are unobstructed. If not, please notify the maintenance personnel immediately for maintenance.

2. Check whether there is enough oil in the fuel tank. If it is not enough, you should add enough. .

3. Check whether the hydraulic system is leaking. Before starting the machine, carefully check whether each component is in good condition, whether the position of each drive handle and shift handle is correct, and the machine should be carefully lubricated and maintained as needed.

4. The operator must be present at the same time before going to work, and pay attention to observe the machine to prepare each.

5. Before starting the machine, turn the part where the machine can rotate, observe whether there is any abnormality when the machine rotates, and notify the maintenance personnel for maintenance when the situation is found.

6. When starting, first turn on the power switch to power on the machine, and then turn on the switch of the electric oil pump and each motor for trial. After the work stops, the train is in the upper frame.

7. During the operation of the equipment, if abnormal conditions such as spindle vibration, loud noise, or pressure above 65℃ are found, the situation should be checked immediately with the mechanic.

8. Mechanical failure should be notified to relevant personnel immediately. Find out the cause. Troubleshooting. No handling without authorization.

9. After the work is completed, stop the fan and let the drum run for 2-3 minutes to remove the mud before stopping. Then do the maintenance work, brush iron powder, lubricating oil, and cut off the power supply.

It is used for fermentation, ripening and moisture removal in organic fertilizer plants, compound fertilizer plants, sludge landfills, gardening fields and Agaricus bisporus cultivation fields.

Hot Tags: best compost maker, China best compost maker manufacturers, Groove Type Compost Turner, Rotary Screen Fertilizer, Fertilizer Granulator Machine, Compost Mixing Machine, Crawler Type Compost Turner, Auxiliary Equipment